newlogo

1 2 3 4 5 6 7 8 9 10 11
 

 

sevenlogo  Concrete Pulverizer

Downsize large areas of concrete and separate difficult rebar quickly, quietly and efficiently!

ADVANTAGES
Value and Speed: The mechanical Pulveriser Jaw makes fast work of concrete debris, operating at ten to twelve working cycles per minute. Simple, heavy dutypulverizer3 design at less than half the cost of comparable hydraulic units.

Amplified Force: Power-Positive attachment coupling system, amplified bucket ram force and raised center tooth design focuses crushing power at the point of engagement.

Clean Result: Fast jaw speed and greater crushing power produces clean separated reinforcing steel (re-bar) and clean crushed concrete in pieces of six to eight inches and smaller.

Pivot Bushings: The units are fitted with oversize fibre semi-self lubricating bushes for outstanding rigidity and less maintenance.

Tough: Thicker manufactured-material sections together with the use of heavy wall tubing across the jaws gives the Pulveriser Jaw greater durability and rigidity.

Simple Teeth Maintenance: The Pulveriser Jaw’s replaceable, abrasion-resistant teeth are welded in to create a solid work platform. New teeth will work harden while pulverising steel re-enforced concrete and are longlasting, only requiring replacement approximately every two years depending on usage. No hard facing is required.

More Power-Faster Change: The Power- Positive attachment coupling system creates 25% more power and allows fast changeovers to OEM buckets and other A-Ward attachments such as Re-bar Shear, Rail/Wire Shear, Grapple Jaw, Steel Shear, Concrete Shear, and Sieve Rakes.


APPLICATIONS
Demolition: Excels in the secondary processing of concrete debris for fill and crusher feedstock. Also used in primary demolition of bridge decking, parking structures, floor slab, beams, and footings.

Concrete Recycling: Use in place of hydraulic breaker for faster and quieter preparation of concrete for crusher feedstock. Separates concrete from rebar cleanly for maximum resource recovery.

Cast Iron Recycling: Excels at safely breaking cast iron material such as machinery stands and engine blocks.
 

pulverizer2
pulverizer

Works off existing bucket cylinder and linkage

Model #
Attachment Weight approx.
Plulverizer Jaw Opening
Upper Jaw Width
Lower Jaw Width
Jaw Length from Pivot
 
lbs.
kg
in
mm
in
mm
in
mm
in
mm
200
3300
1500
29.5
750
27.1
690
21.6
550
29.5
750
300
3960
1800
32
813
30.9
785
25
635
33.8
860
400
5280
2400
37
940
34.6
880
28.3
720
37.8
960

© The St. George Company Ltd.  |  Toll Free 800-461-4299  |  Phone 519-442-2046  |  Fax 519-442-7191

TERMS & CONDITIONS

WARRANTY & DISCLAIMER