newlogo

1 2 3 4 5 6 7 8 9 10 11
 

 

sevenlogo METAL SHEAR

shear1

APPLICATIONS
Demolition:
Excels at primary demolition of light to medium gauge I-Beams, channel, racking, re-bar, and tanks.

 

Scrap Processing:
Perfect for fast processing of light and medium gauge material. Works well as a companion to a hydraulic shear as a primary sorting tool.

 

Tire Processing:
High speed manipulation slicing and reduction of large truck and loader tires. Cuts through rubber like butter.

ADVANTAGESshear3
Value and Speed:
Preferred tool for processing of light and medium gauge scrap steel. Cycling 12-14 times per minute, this tool is faster and is a fraction of the cost of comparable hydraulic mobile shears.

 

Innovative Blade Configuration: The Steel Shear utilizes seven identical blades with eight usable edges for shearing and piercing. Maximum utilization means less consumables. Threaded blades allow for easy shimming and replacing.

 

Extra Heavy Duty Pivot Group: High tensile shaft, case hardened with a 360 degree lubricating system and fitted with semi-self lubricating bushes. An increase in the bearing surface area by 40 -50% and an increase in pivot length, together with a two-into three pivot configuration creates greater jaw rigidity and better bearing load distribution.

 

Anti-Jam: New anti-jam relief rebate below blade surfaces releases thin, potentially jaw-jamming material faster. Threaded blades allow for easy removal in case of jam.

 

Tough: Thicker manufactured material sections and the use of high tensile steel for fabrication gives the Steel Shear greater durability and rigidity. More Power-Faster Change: The Power-Positive attachment coupling system creates 25% more power and allows fast changeovers to OEM buckets and other

 

AS300

AS400

AS650

Excavator Weight

66,000 lb / 30,000 kg

88,000 lb / 40,000 kg

143,000 lb / 65,000 kg

Attachment Weight

3,300 lb / 1,500 kg

4,400 lb / 2,000 kg

5,7200 lb / 2,600 kg

Jaw Opening

18.6” / 470 mm

21.6” / 550 mm

26.5” / 675 mm

Upper Jay Width

4.6” / 118 mm

4.6” / 118 mm

5.5” / 140 mm

Lower Jaw Width

12.2” / 312 mm

12.2” / 312 mm

15” / 380 mm

Jaw Cutting Length

17.3” / 440 mm

20” / 505 mm

24.4” / 620 mm

© The St. George Company Ltd.  |  Toll Free 800-461-4299  |  Phone 519-442-2046  |  Fax 519-442-7191

TERMS & CONDITIONS

WARRANTY & DISCLAIMER